RoyalTek RFG-2000 Manual de usuario

1Onyx RFG-2000 GPS Receiver User Manual RFG-2000 Ver1.0c, April/2/04’

10

11How to test RFG-2000 (PDA version only) 1. Insert RFG-2000 CD-Disc, choose “GPS Monitor for PocketPC” item to install the PocketPC version of Roya

12 3. The RoyalTek GPS Monitor main screen as shown. 12-Channel Signal Level Color Coding Red Color: The satellite is known from almanac informat

13Green Color: The satellite is being tracked and is being used in the current position solution. 4. Select [File]->[Connect/Disconnect] menu item

14 6. Select [View] menu and select different view modes including Satellites View, Navigation View and Development View as below.

15 7. If you want to cold start the GPS receiver, select “Cold Start” from the “Function” menu and click “Action” icon, the system will clear the RF

16

17Specifications Physical characteristics Dimension: 57±0.3(Length) X 50 ±0.3(Width) X 15.5 ±0.3(Height) Weight: 70 +/- 5 grams Temperature cha

18Certification FCC/CE compliant Waterproof standard IEC 68-2-18 test Ral

19Software Data NMEA 0183 V3.0 Protocol It is the RS-232 interface：4800 bps, 8 bit data, 1 stop bit and no parity. NMEA Output Messages The RFG-20

2Contents WHAT IS ONYX, RFG-2000...3 WHAT IS INSIDE...

20dddd = decimal parts of minutes <E|W> Indicator E E=east or W=west Fix Valid Indicator 1 v 0 = Fix not valid 1 = Fix valid Satellites U

21mm = minutes ss = seconds dd = decimal parts of seconds Status Indicator A A = valid V = invalid Mode Indicator A A=autonomous N=data not val

22and SNR value. The information for four satellites maximum per one message, additional messages up to maximum of eight sent as needed. The satellit

23＜CR＞＜LF＞ End of message termination RMC－Recommended Minimum Specific GNSS Data Time, date, position, course and speed data. $GPRMC,hhmmss.dd,S,x

24Checksum *14 *hh ＜CR＞＜LF＞ End of message termination VTG－Course over ground and ground speed Course and speed. $GPVTG,h.h,T,m.m,M,s.s,N,s.s,K,

25Troubleshooting Problem Reason Solution Poor connection or can’t find GPS module Check the RS232 and PS2 connector or USB connector to make sure t

26Appendix: Connector Interface 9 pin D-SUB Pin NO Signal Name I/O Description Characteristics 1 No connect 2 TX O Serial Data Output High: -3V

27Limited Warranty Distributor for RFG-2000 grants a warranty for this product for one year starting from the date of purchasing of the product. Pl

3What is Onyx, RFG-2000 Congratulation on your purchase of Onyx, offering diverse GPS (Global Positioning System) applications. Onyx GPS receiver, RF

4What’s Inside the Package Before you start up, make sure your package includes the following items. If any item is missing or damaged, contact your

5Start-Up for RFG-2000 (RS-232 & USB) Getting Started Step 1: Plug-in RS-232 or USB cable to your laptop or desktop PC. Step 2:Install USB driver

6(3) It is strongly recommend that user doesn’t plug and unplug this connector frequently. Start-Up for RFG-2000 (PDA) Getting Started Step 1: Plug

7USB Driver Installation for Windows Operation System Getting Started Step 1: Plug USB connector to USB port of your laptop or desktop PC. Step 2: In

8Step 4. You can check COM port number of RFG-2000 from System properties now. The COM port is COM3 in this example. Step 5: Place your Onyx on the

9USB Driver Installation for Pocket PC The RFG-2000 Installation CD provides the Pocket PC USB driver installation. If your Pocket PC need to install